2014年9月25日 · This made the foam itself more rigid and it was the foam that ultimately cracked when normally it is very flexible. The 2:1 PVA was the thinnest of all materials used, and that caused the biggest cracks. If you want flexible pieces you need to maintain flexibility in both the foam AND the sealant.

2015年12月9日 · Hi all, been working on foam builds and the usual "super glue" is not working when joining 2 pieces of EVA foam together. Any Australian builders here got any recommendations. I still use hot glue gun but have little kids around and can't work with it when they are around (which is often).

2012年6月12日 · I'm going to be starting my first foam costume in the coming weeks and wanted to know what type of glue I should use to connect the pieces together. I've been lurking on the threads and have seen hot glue and barge glue. Hot glue doesn't seem like it would hold up over time and I don't know what barge glue is or where to get it.

2008年7月7日 · I've glued convoluted foam/eggcrate foam to the inside of my gun, telescope, and costume cases using 3M Super 77 spray adhesive. Kinda messy, but it works great, and won't let go! YOU HAVE TO DOLLOW THE DIRECTIONS ON THE CAN.

2011年5月4日 · The answer you're looking for is Hot Glue. Don't use too much though (but not too little)... you don't want the hot glue to squirt out of the joint between the foam pieces... because this will make the joint more visible and harder to hide (regardless if …

2013年10月6日 · I've been learning about PVA glue, and how most people use it to seal the porousness of the foam. But there are at least 2 distinct common types: school glue, which retains some level of flexibility, but is extremely weak; and carpenter's glue, which cures as …

2014年7月17日 · You can use wood glue, or gesso, or bondo (careful to apply gesso or wood glue first, as bondo peels off of worbla), or my new favorite: Apoxie Sculpt. Apoxie gets kinda heavy though. Here's some before and after pics:

2008年8月25日 · Floral foam is a tad too soft. I used kit knife, sand paper, fingers, rasps (curved+straight),various saws, you name it. After carving it, your better to seal it with elmer's glue/water milky mix or a automotive clear coat. Don't want dust flying all over the place.

2014年8月2日 · 1. Do you seal your foam with a heat gun before Elmer's glue and Plastidip? 2. I assume you use multiple coats when you paint. So do you have to wait 36 hours before you recoat it in the same color? 3. This is a little random, but what color Plastidip do you use? 4. Do you clear coat the painted pieces? If so, what product? 5.

2013年9月26日 · I bought some Gorilla Glue tonite to repair the foam indoor hull of my Parrot AR Drone after a hard landing.It was broken in four pieces.I love GG already: Only an hour after application,it has mended the foam and seems as strong as new.The only thing is there is glue foam extruded at the glue joint,which cures white.The instructions say you can wipe off the excess,or cut it off later.Make ...